Brother MFC-J497DW Setup

MFC J497DW PRINTER SETUP WINDOWS

Brother MFC J497DW printer Setup connection with your windows PC as follows:

  • Unbox your Brother MFC J497DW Printer.
  • Remove all the packing materials.
  • Open the top area of the J497DW Printer.
  • Place all the eight drum locks to the directions which were instructed.
  • Remove each drum unit and toner cartridge assembly and remove packing materials from each assembly. Also, remove the packing materials from the belt unit that is found below the drum unit and toner cartridge assembly.
  • Then, shake the drum unit and toner cartridge set on each side to make the toner cartridges move freely.
  • Now, install the drum unit and toner cartridge set in the holders as the colours specified in the MFC J497DW printer and close the top cover.
  • Open the Paper tray, load the paper and close it properly.
  • Connect your printer and power supply using the power cord.
  • Power ON your J497DW printer.
  • After MFC J497DW printer is ready for the first time installation, Connect the USB cable to the computer¬†with the printer. Provided your computer must be connected to the strong network connection.
  • When your computer is connected to the J497DW printer, the built-in drivers for your Brother MFC J497DW printer will get downloaded automatically in your Brother MFC J497DW Printer.
  • While connecting the USB cable, make sure that you place your computer and printer as close as possible.

MFC J497DW PRINTER SETUP MAC

  • Complete Brother MFC J497DW Printer unboxing and remove all the wrappers.
  • Open your MFC J497DW printer top area.
  • Move all the eight drum locks to the instructed way.
  • Take out each drum unit and toner cartridge assembly and remove the orange coloured packing materials from each assembly. Also, remove the orange packing materials from the belt unit that is found behind the drum unit and toner cartridge assembly.
  • Then, shake the drum unit and toner cartridge set to each side to make the toner cartridges move easily.
  • Now, install the drum unit and toner cartridge assembly in the holders as the colours specified in the MFC J497DW printer and close the top cover.
  • Open up the paper tray out and extend the paper extension and load Sufficient amount of papers. after that close the paper tray.
  • Connect your printer and power supply using the power cord.
  • Power on your J497DW
  • Connect your Mac device to a network connection.
  • In the browser of your device, type brother MFC J497DW drivers for Mac and search.

 

After Completing the Basic Print Setup, Download and Install the suitable brother mfc j497dw driver and do brother mfc-j497dw wireless setup to enjoy Printing using Brother Printer.

Leave a Reply

Your email address will not be published. Required fields are marked *